Warning: call_user_func_array() expects parameter 1 to be a valid callback, function 'remove_jquery_migrate' not found or invalid function name in /home4/interested12/public_html/wp-includes/class-wp-hook.php on line 286
Water Less Furnaces – Best Outdoor Wood Boiler .menu-item-has-children{ cursor:pointer; }sss

 Top Loading Wood Boiler 

 

 Machine Top Loading Wood Burning Hydronic Boiler 

  

 Hyprotherm Top Loading Wood Boiler Furnace from $9264 

 

  

  

 Hyprotherm Top Loading Boiler: Model 534 5 feet long x 3 ft wide x 4 feet tall firebox; Firebox Thickness is ONE HALF INCH! 60 cubic foot wood capacity; will heat 10% more than the one 6 foot long one below (Model 450/633) because this has a one foot deeper firebox.

 

 Large Machine Loading - Top Loading Furnace! Log burner! 

 COMPARE HYPROTHERM Top Loader to a Tennessee Outdoor Furnace HOSS FURNACE Top Loader - Top Loading Boiler!

 Hyprotherm Top Loading Log Boiler FEATURES:

 Propane and Waste Oil Burner and Wood Top Loader

 Stump Burner 1350L

 Model 1350L (STUMP BURNER) in production before the siding is put on. This boiler is HUGE! BURN and DISPOSE of PALLETS 

 Here is our 2nd BIGGEST TOP LOADER WOOD BOILER!

 Note the 12" water jacket which give this HUGE 1527 Gallon water capacity. That side loading door gives you a dimension of size because it is 26 1/2" X 26 1/2".  BIGGEST TOP LOADER in the WORLD!

 Forced-Air Top Loader Boiler

 The lid open on the forced-air top loader kiln furnace. 

 These fans have optional external air-cooled motors on them so that they can stay cool and  are not effected by the high temperatures of a kiln dryer. 

 The air temperature is thermostatically controlled. You can easily set the output temperature yourself; easily exceeding the 160F inside wood temperature required by USDA. (Yellow switch shown is temporary test switch for lid)  

 NCB-400-TL Top Loader Wood Boiler from Nature's Comfort 

 NCB-400-TL Specifications

 Outside Wood Boilers | TOP Machine Loading Wood Boiler | Coal Boilers |  Water-less Forced-Air Wood Furnaces |  Used outdoor wood boilers for sale

828-683-8055

Best outdoor wood boiler for outside in Canada

Simplicity is the key and every one of Our Boilers ARE SIMPLE and easy to work on!! No circuit boards, no computerized parts, no smart phone hookup; just simple off-the-shelf parts that you can purchase anywhere and you can maintain this furnace and repair it, if need be, yourself!

Water Less Furnaces

All ThermoWind models will burn COAL as well because we have a forced air induction fan that blows air up through the grates just like a blacksmith’s forge; the only way that coal will burn is feeding oxygen from the bottom.  

That is why so many other furnaces and boilers will not burn coal because they have a fan on the front door, which will not work.

ThermoWind 1000
is Rated to Heat up to 4375 sq. ft.¹

$4897 – NEW DESIGN

Up to 4375 sq. ft, 
with pull-out ash tray, pre-wired,
a 25% bigger firebox (28″ deep x 30″ wide x 34″ high);
more wood capacity
which means less loading! 



Sunset in AR – Click on Photo for 20pxR IMAGE!
Your choice of 20 different colors at NO CHARGE!
(see very bottom of this page)

New design with bigger doors
(2 foot by 2 foot opening),
pre-wired,
with a pull-out ash tray!
1020 CFM Blower

$4897 – NEW DESIGN

Optional CAST IRON grates $65 each

ONLY $4667 – Legacy (original) DESIGN
is Rated to Heat up to 3500 sq. ft.¹ 

This firebox has the same 36″ cylinder 
(Original Legacy model only) and is 28″ deep.

It is rated at 91,000 BTU BTU Legacy / 114,000 New Design
burning a good hardwood like oak
burning a good hardwood like oak and better hardwoods
like Hickory, Locust or Hedge can potentially give you
25% MORE BTUs

Recommended pad is is 50″ wide x 94″ long minimum,
plus any extra you want it the back, where the fans are.


ThermoWind 2000

is Rated to Heat up to 6575 sq. ft. ¹

Has a BIGGER 3-speed 2020 CFM blower
and a bigger firebox (42″ vs. 28″ deep)
42″ deep x 30″ wide x 34″ high
it’s 50% bigger than the TW1000
(Only $700 more for a 50% bigger furnace!)

Recommended pad is is 50″ wide x 112″ long minimum,
plus any extra you want it the back, where the fans are.

$5597 – NEW DESIGN
– NEW DESIGN 6575 sq. ft,
with pull-out ash tray, a 25% bigger firebox; more wood capacity
which means less loading! 


Just $700 more than the smaller furnace but 50% BIGGER!

Legacy (original) Design 
$5357


Optional CAST IRON grates $6
5; 2 needed = $130.00 

Original Legacy Design with a Round firebox is Rated to Heat up to 5500 sq. ft. ¹

135,000 BTU Legacy / 169,000 New Design
burning a good hardwood like oak


ThermoWind 3000

ThermoWind 3000 Forced-air wood furnace

is Rated to Heat up to 8600 sq. ft.¹

With 2020 CFM 3-speed fan
55″ deep x 30″ wide x 34″ high

It is rated at 165,000 BTU BTU Legacy / 206,000 New Design
burning a good hardwood like oak.

$6057  up to 8600 sq. ft, NEW DESIGN which has a BIGGER 3-speed 2020 CFM blower, pull-out ash tray, a bigger firebox; more wood capacity which means less loading! 
Optional CAST IRON grates $65; 2 needed = $130.00  

Original Legacy Design with the Round Firebox,
is Rated to Heat up to 6875 sq. ft.¹

only $5797 – Legacy (original) Design

Recommended pad is is 50″ wide x 88″ long minimum,
plus any extra you want it the back, where the fans are.

 


ThermoWind 4000

 

Normally sold with round 12″ ducts (top) but also sold with square ducts

as shown in this photo below because we custom build everything!


is Rated to Heat up to 10,700 sq. ft.¹

Loading twice a day but it will heat more but it has to be loaded more often

The ThermoWind 4000 is designed to heat a 20px buildings of up to 10,700 sq. ft.

It will have two full-size furnace fans on it (2020 CFM each), to better heat a 20px building – with a total of 4 ducts ( 2 supply and 2 return). It has a 69″ firebox that is 3 feet wide and has two firebox doors; one on each end, to better and easier load the furnace.  It has a forced air draft fans with automatic dampers on it.

It is rated at 205,000 BTU BTU Legacy Cylinder Firebox;  Capacity; 31.92 cubic feet

It is rated at 256,000 New Design, burning a good hardwood like oak. (28.4% Bigger)

Firebox Capacity: 41 cubic feet and is 1/4″ thick (as thick as most boilers on the market)

Firebox Dimensions: 69”L x 30”W x 34”H

Outside Dimensions: 72.5” x 76” X 87.5″ HIGH (Top of Flue)    

Recommended pad is is 75″ long (6.25 ft) x 12 ft. 4″


$7617 
Up to 10,700 sq. ft,
NEW DESIGN
with pull-out ash tray, 
pre-wired,
25% bigger firebox,
= more wood capacity
which means less loading! 

__________

The price is $7367 for the Legacy (Original) Design with the Round Firebox

Optional CAST IRON grates, either model is $195 for three (requires 3 grates)

The Legacy ThermoWind 4000 is designed to heat a 20px buildings of up to 8,500 sq. ft.   

¹ Heating a well-insulated home in a climate as cold as PA,
using a good hardwood like Oak and loading it twice a day.

FYI: If you are heating HALF as many square feet as our rating,
you can load it just ONCE a DAY!

REMEMBER! There is no such thing as a furnace that is too big because it is NOT like an air conditioner,
where if you get one too big, it becomes inefficient.

 

This is like getting a bigger propane or oil tank!  You can load it with more wood (full rounds – no splitting!) and it will burn longer and therefore you will load it less often. No one has ever complained and said that I sold them one too big. In contrast, many people have said, “I wished that I listened to you!”

 

 

Wadena / Hopsco Forced Air Furnace vs
Hyprotherm Forced Air Furnace

Hopsco who purchasedWadenaHyprotherm Manufacturing LLC
Firebox Thickness: only 3/16″
24/28″ deep
Firebox Thickness:
33.3% thicker at 1/4″
28-68″ deep!
ODF1500: 780 lb ODF2000: 950 lbTW1000: 1669 lb
TW2000: 2020 lb
TW3000: 2406 lb
TW4000: 3200 lb
Blower:
Just 1500 CFM
34% bigger blower: 2020 CFM

Heating area

ODF1500: 2,800 sq. ft.
ODF2000: 4,000 sq. ft.

TW1000: 4,375 sq. ft.
TW2000: 6,575 sq. ft.
TW3000: 8,600 sq. ft.
TW4000: 10,700 sq. ft.
This is loading it twice a day OR ONCE A DAY heating half of that square footage.

Note: There is no such thing as a furnace that is too bigbecause it is not like an air conditioner, where if you get one too big, it becomes inefficient.

This is like getting a bigger propane or oil tank!  You can load it with more wood (full rounds – no splitting!) and it will burn longer and therefore you will load it less often. No one has ever complained and said that I sold them one too big. In contrast, many people have said, “I wished that I listened to you!”

Duct Size 10″
20% bigger Duct Size; 12″
Flue must be purchased separately87.5″ Flue included WITH a chimney cap²
Firebrick must be purchased!No Firebrick needed due to thicker firebox!
 I have never heard of this furnace until I saw this post so I checked out the website. The first thing I noticed was the tiny air ducts, then I saw only 500 cfm fan?!Those two items would make me walk away and not look back.
See review
COMPARE to our 20% bigger ducts AND our 34% bigger fan!

² OUR Flue drops down into the firebox 14 inches, trapping in the heat and the smoke but more importantly, the gases, due to this huge secondary burn chamber, which will be burnt off; valuable heat energy that would have been otherwise lost, up the flue. 

 

Underground insulated ductwork shown.

CALL 828-683-0025
9 AM – 9 PM ET – 6 days a week!

FURNACE DIMENSIONS of Legacy Models 

HyProTherm Thermowind 1000
45″ x 48.5″ x 90″ tall –
1480 lbs not crated
Crated weight Approx: 2069 lb

HyProTherm Thermowind 2000
45″ x 54.5″ x 90″ tall
1840 lbs not crated
Crated Weight Approx: 420 lb

HyProTherm Thermowind 3000
45″ x 54.5″ x 90″ tall
1840 lbs not crated
Crated Weight Approx: 2806 lb

HyProTherm Thermowind 4000
45″ x 54.5″ x 90″ tall
1840 lbs not crated
Crated Weight Approx: 3600 lb

FIREBOX SIZES (Original – Legacy Design)

Model       Description    Width   Depth    Height (Legacy; approx)

TW-1000   36” cylinder    36”      28”         26” + 10” for Ash Pan*

TW-2000   36” cylinder    36”      42”         26” + 10” for Ash Pan

TW-3000   36” cylinder    36”      55”         26” + 10” for Ash Pan

TW-4000   36” cylinder    36”      68” ¹       26” + 10” for Ash Pan
¹With two doors; a door at each end of the firebox

NEW Design Firebox formed with ONE PIECE of steel, using a 430 Ton Press Brake

Model      Description      Width     Depth   Height

TW-1000 square firebox   30”      28”         34”

TW-2000 square firebox   30”      42”         34”

TW-3000 square firebox   30”      55”         34”

TW-4000 square firebox   30”      69”        34”
¹With two doors; a door at each end of the firebox

________________________

Fireboxes are just 22″ from ground level for easy loading!

All ThermoWind models will burn COAL as well because we have a forced air induction fan that blows air up through the grates just like a blacksmith’s forge; the only way that coal will burn is feeding oxygen from the bottom.  That is why so many furnaces will not burn coal because they have a fan on the front door, which will not work.

*Non-removable Ash “Pan” or receptacle on Legacy Model

All NEW models have a pull-out ASH PAN!

All specifications subject to change at any time.

TW1000, TW2000 and TW3000 models

 

 


HyProTherm has been building furnaces since 1972!

Our furnaces have stood the test of time.

HyProTherm Forced-Air Outdoor Wood Furnaces are WELL BUILT to save you money
by producing heat efficiently with a minimum of waste, expense, or unnecessary effort.
Although our forced air furnaces are a new line, they are built using the same materials,
familiar design and proven techniques that we have been using for 46 years.

Perfect for folks with cabins or homes that are unattended.

Perfect for homes without an existing heating system!

Will heat your home just as well as a gas or oil furnace. (Will not heat your domestic hot water.)

No worries about water freezing ever again! No water tests!  No pumps!


THE HyProTherm OUTDOOR WOOD BURNING FURNACE

How does an outdoor furnace heat my home?

The HyProTherm Outdoor Wood Furnace is designed to save the absolute most energy and provide the most comfortable heating available; not dry. It heats your home by heating a firebox surrounded by a steel air chamber. When this air chamber reaches a preset temperature a fan controller turns on the main circulation blower (our built-in furnace fan). This blower forces the air into your existing central duct system. Can also be used without any existing ductwork.

How do the Thermostat Controls work?

The only visible addition to the heating system inside your home is a 2nd thermostat, which is located near the existing thermostat, where possible. This thermostat actuates the combustion blower of your outdoor furnace to fuel oxygen into the smoldering fire.. When the air inside the air chamber reaches the optimum temperature, a fan controller turns on the main circulation blower. This blower forces the air into your existing central duct system (if you have any). The original wall thermostat turns on your original furnace, if the outside wood furnace is not in operation. Your existing furnace will take over automatically, to maintain your household temperature.

This is good if you can’t get home to fill the furnace with wood or if you go on vacation. No switched and no relays to make this happen.

Original Legacy Design with the smaller door

Two buried 12″ pipes carry the heat to the house
and the cooler return air comes back.

This is standard steel duct wrapped with insulation.
The insulated underground pipe looks different than this.
See DUCTWORK below and black pipe kit above.

We are the FIRST in the industry to have
special insulated underground ducts!

CALL 828-683-8055
9 AM – 9 PM ET – 6 days a week!

 


We custom build every  furnace for you,
so when you order, you can
have YOUR choice of
21 great colors
with over 8000 different Color combinations!

PLUS square ducts
instead of round (additional cost)


ALL FURNACES purchased come with new Superwool and Knauf insulation!

The COLD WEATHER PACKAGE is available, as well!

Now with even MORE INSULATION!

R50 in the roof!

R21.6 in the walls!

More than a house!!

We now use SOLARGUARD TOO!

It’s a state-of-the-art insulation that
fights heat loss three ways;
radiation, conduction and convection heat losses.

Check Solarguard out at: http://www.silvercote.com/solarguard_reflective_insulation.php

 

Fed up with High Oil Propane, Electric prices? 

Smoke in your house? Bugs, trash, bark from carrying wood in?

Heat your whole house with a clean, efficient
Forced-Air OUTDOOR WOOD FURNACE!
GO GREEN!

No more $3.00 – $4.00 Oil or high dollar Propane.
No more lugging wood into the house!
No smoke in your house ever again! No bugs either! NO mess!

This furnace doesn’t burn up the oxygen in your house or suck cold air in from outside!
NO DRIED OUT AIR

Save your lungs and help prevent allergies too.

WOOD is still cheap! …AND PLENTIFUL!
and use 20px un-split logs – in the HyProTherm OUTSIDE FORCED-AIR WOOD FURNACE –
the least expensive wood of all!

Have Clean Heat, Clean Air, Clean Floors and walls too!


NOW with a 

20 YEAR PARTS and LABOR WARRANTY!*

Includes an On-Site Warranty
that others don’t offer
!!
5-Years is paid for 100%;
Years 6-20 are generously pro-rated.

What other manufacturer offers that
and who else has been around 46 years?

NOBODY!

A lot of warranties only cover parts (not labor)!
OR
You have to ship the furnace back to the factory – at your expense.
Kind of negates the warranty, doesn’t it? 

Ours covers Parts AND Labor for TWENTY YEARS!*
and it’s coverage On-Site –  NO SHIPPING!
(Electrical components have their own respective parts warranty)


Why buy a HyProTherm Outdoor Furnace?HyProThermThe others
Our fan is in the back, behind a door, where you can’t get shocked AND it blows the air through the grate into the bottom of the fire LIKE A BLACKSMITH’S FORGE – NOT into the side of the fire! Fires burn from the bottom up, right?NO
We make it simple without a lot of expensive electronics to breakNO
We make it user serviceable. Anyone can maintain our furnace!NO
We make our firebox to last! Ours is thicker!  3/8″ inch vs. 1/8 to 1/4.NO
We give accurate BTU ratings using an established scientific formula. They say what sounds good.NO
We have a 2-light motion detector light on the frontSome
We have a forced-air fan not a dismal damper to fuel the fire with oxygen. More complete burning!NO
No filling with water every week –  or EVER!NO
We have been building fine energy efficient  furnaces for 39 years!NO
Our grate uses 3/4″ thick Bar Stock! OPTIONAL CAST IRON!NO

Green Forced Air Furnace

Our most popular color – Green with Black trim

Perfect for folks whose homes have power failures often
or those people with cabins, shops or homes that are left unattended.
NO risk of water freezing! No fire risk either!


Why buy an outdoor wood furnace?

  • No logs to carry in = no messy ashes and bugs in the house!
  • You can have your outdoor furnace conveniently located it near the
    wood pile, so you don’t have to carry wood all around.
  • Safety
    • The chance of carbon monoxide build-up in your home is eliminated.
    • Eliminate allergies by getting the smoke outside!
    • The chance of a gas explosion from your furnace in your home is eliminated.
    • Indoor pollutants of harmful gases and fumes are eliminated too.
    • The chance of chimney and flue fires is eliminated, in your home.
  • If you live in a suburban or rural area near a source of cheap wood, you could heat your
    home for the entire season for the cost of one month’s electric heat bill, propane or oil bill. 
  • An outdoor furnace requires less tending than a smaller indoor wood stove or insert.
  • No inside oxygen is used to fuel the heat like other wood or gas burning units.
  • Does not cause respiratory problems like burning wood indoors. No dry air either.
  • Wood is cheaper than buying it for a fireplace. Instead of 12-18′ wood split,
    you can put 26 or 40″ pieces in this one and use full rounds.
    No splitting wood; that makes buying wood even cheaper.
  • Burning wood, a total renewable resource, is much less expensive than other fuels.
  • The cost of electric, gas, oil, or propane can be very erratic.
    The low cost of wood remains constant – or in many cases, FREE!.
  • The furnace hooks up to any existing gas pack, heat pump or forced air system
    – or can be used without any exiting heating system or ductwork.

Most people say that they pay for their furnace in 2 years or less!
Imagine getting a 50% return on your money!

Where else can you get that?
 An outdoor furnace is the BEST INVESTMENT EVER!

You’ve found the BEST!

You can click Click on some Pictures below for a 20pxR Image
Please wait while these pictures load. can take up to 3 min on a modem to load the whole page.

Ivory and Blue Outside Wood Burning Furnace

LEGACY (original design) shown above
Lights come shipped inside the firebox,
so they don’t break in shipping.

A water furnace is shown here for color only.

Get the Bugs, Trash, Wood
and Smoke outside.
Your lungs will love you
and your new HyProTherm!

Many people report getting
lower insurance rates because
they are getting the fire and that
related hazard, out of the house!

Extra 20px, 2 foot by 2 foot waist high loading door opening.

No more bending over, straining your back to load wood! Safety latch!

A PROVEN and trusted design – since 1972!

We feel we build the safest furnace
(nothing electrical, unprotected on the outside of the furnace). 

We have the BEST PRICES and a Very Friendly Staff to help you every step of the way.

Outdoor Wood Burning Furnace Motion Lights

These furnaces now come with a double flood light on the front (black or white), for ease and safety when loading your wood at night.

It’s a MOTION LIGHT!

No switches. No forgetting to turn it off. If it’s dark outside and you go near the furnace, the lights turns on!

New, nicer looking furnace!

Now with nice neat looking butyl tape and grommets.

Outdoor Wood Burning Boiler Door

Think the door isn’t big enough? 
It is NOW at 2 feet by 2 feet!
A 15″ round oak log, just 30″ long, will weigh a whopping 112 lb
– more than most people can ever lift! 

Trust me, the door is more than big enough for anything
you can lift into the furnace
AND the thick door frame
will take a pounding as you throw them in!

NOW BIGGER 24″ x 24″ Door   – The TOUGHEST door you’ll ever find with TWO 1/4″ solid steel plates separated by a 3″ air shield AND our better insulation. This plate keeps the hot air in and deflects it off the door. With very little metal to transfer heat to the door it does an excellent job of insulating the door.

Very heavy duty hinges! Motor mount style. OURS won’t fall off!

Outdoor Wood Burning Furnace Firebox

Click on Pictures for a 20pxr image
1/4″ thick flue pipe – will not get damaged by throwing wood in it.

The chimney is low on the firebox and exits about 1 foot from the bottom, so that the smoke – or more importantly, the gas and heat – is trapped so that it doesn’t quickly escape out the flue. That would be a big loss of efficiency.  

This way the air has to cool off to find its way down and out the chimney. This is also a better idea since you don’t have hard-to-clean baffles getting a creosote buildup on them.

Having the chimney come down low
and stops the heat, gases and smoke from rushing right out the chimney AND creates a HUGE Secondary burn chamber to burn off all the gases from the wood – a HUGE source of energy!

When wood starts to burn it’s the gas that burns first!

Another advantage is that the chimney exits through the air chamber, further heating it up – for free! Nothing does better!

This also means that you will burn less wood than with other manufacturer’s furnaces, therefore you will use more wood – being less than 75% efficient. That’s proof, not just rhetoric.

 

1/4” Thick Steel Firebox – WILL NOT burn through – EVER! Will not crack or split like stainless steel!

We have never had a firebox failure, crack, split, rust-through or leak in 46 years of making the 3/8″ thick firebox. After all, it is 50% thicker (or more) than most of the competition!

Compare Firebox thickness to another popular furnace at only .125″ and another at .1875″ thick. 

We have a removable ash TRAY! Some other makes don’t even have an ash receptacle at all! 

That makes it VERY HARD to clean out! You have to let the fire die down  or move the burning wood aside to scoop out hot ashes. OUCH!

It is made of a solid sheet of 3/8 inch thick steel, formed into 3/4 of the firebox by a 430 Ton brake press! 

It WILL NOT RUST through in a lifetime! Will not get stress cracks like Stainless Steel!

We have furnaces well over 30 years old and more, still in use today!

3/4

The removable grate is made out of CAST IRON unless you specify a wood model which gives you a super thick 3/4″ inch bar stock grate 

Most grates from other manufacturers (if they have them) are only 3/8″ – 1/2″)

 

Outdoor Wood Burning Furnace Ash Receptacle

Click on Picture
for a 20pxr image

The blower in the back is a great aid
in getting a fire started. It also recovers
the air temperature much quicker,
and burns the wood up more completely
because oxygen is being fed to
the bottom of the flame –
like blacksmith feeds his fire!

A clean-burning fire is more efficient than a smoky air-restricted fire. The forced draft will burn hotter and therefore cleaner. Secondary gases burn at 1200 degrees and with our furnace, they are trapped in the firebox so that they are available to be burnt off without escaping out the chimney. The HyProTherm will exceed that temperature.

 <  View through ash pan door and you can see the fan blower inlet (seen in back of this picture).

The fan blower determines how hot the fire burns and therefore how hot the air in the furnace gets. A thermostat on the back of the furnace tells the blower when to turn off and on (and has a solenoid activated door/damper), so it doesn’t run all the time and will not waste wood.

This is a LOT more efficient than a manual damper will ever be!

The air blows into the bottom of the fire, through the grate – just like a blacksmith’s forge. That’s better than blowing in from the front door (very obvious when you see that big box on the door) and into the side of the fire, as all the others do (if they even have a fan).

You get more complete burning fire when the oxygen is fed through the bottom!

Outdoor Wood Fired Forced Air Furnace

Actual photo of a fire inside our firebox,
only minutes after reloading with wood!


Firebox size on the Thermowind 1000 LEGACY version, with the round firebox, is 36″ wide x 28″ deep x 27″ high (due to ash pan in bottom). All sizes O.D.

The NEW style Has the same lengths; 28″ – 69″ but taller at 34″ tall and 30″ wide and holds 25% more wood = 25% LONGER BURN TIMES BEFORE REFILLING!

The air chamber totally surrounds the firebox, top and both sides.

The chimney is also surrounded by air, drawing off heat.

The ash receptacle (and hot coals) are surrounded with air too, in the bottom!

2020 CFM 3-speed Forced air fan for home or building (bottom)
and forced air fan for furnace with solenoid activated damper fan. 

Forced-Air Damper and fan

The fans and thermostat
included, have a one-year warranty.

2000 CFM on all ThermoWind furnaces.

You get a solenoid activated damper too, INCLUDED!

Most parts are available everywhere.

There are NO proprietary circuit boards!

In case of a power failure, you can still have a nice warn house, when everyone else is cold!!


Requires a standard portable 4000 watt generator for the 1000, 2000 and 3000 models,
(this is because of the startup power that the motors take),
but you will have plenty of power left over for lights, small appliances, etc.

 

You MAY need an heating and air guy to hook up the duct work, but all you really need is an adapter from a round 12″ pipe to your rectangle (usually) pipe..

Flanges to connect outside duct to indoor furnace

Everything is very simple and easy to do. There is a comprehensive manual, with lots of pictures and diagrams, that will help you every step of the way. You can also call me or the factory for assistance.

Outside Forced Air Wood Fired Furnace

NOW there is no need to put the furnace right next to the house, with our exclusive insulated underground duct!!

Eliminate the threat of fire by having the furnace well away from the house just like with our outdoor wood fired WATER furnace.

We are the only manufacturer that is doing this!

Perfect for folks who often have power failures or those people with cabins, shops or homes that are unattended.

The two connectors in the back hook up to the blue pipes which are buried in the ground. 

These pipes are only 12″ in diameter so a standard backhoe with a 24″ bucket can easily dig a trench for the pipes to lay side-by-side.

  • Air & Water Tight

  • Foamed Walls

  • Easy to Install

  • Quiet and Efficient

  • PVC FREE

  • GREEN BUILDING Approved Adhesives


Ideal for new construction, as you can see here
but you will just need two pipes running to the house
in an existing structure to connect to your ductwork;
one supply and one return.

Outdoor Forced Air Wood Burning Stove

Round Firebox/Legacy model style shown but the
new models have the SAME blower configuration.


The ash pan is removable ash pan and it is easily cleaned at the front, through the the lower/smaller door.

WARNING! Some other makers don’t even have an ash pan!You have to let the fire die out or shove the hot burning logs aside (yeah, right!), then clean it out while the firebox is 700F plus – and then restart the fire in the dead of winter! Do you want to do that?

There is an fan/blower that feeds air into the firebox, below the grate, to feed oxygen to the fire. It is thermostatically controlled and solenoid activated for greater efficiency, to keep the air temperature in the furnace between certain parameters. 

This is far better than an inefficient manual draft opening.

Fored-Air Outside Wood Burning Furnace

Hanging Outdoor Wood Burning Furnace

Our furnace is so strong and well-made,
that the chimney alone is strong enough
to carry even the 2000 lb. weight of
our biggest forced-air furnace!

We move them like this every day!

The exterior is made of Heavy Duty Siding – 29 gauge structural quality, full-hard steel. 10 layers of protective coating. It has a Lifetime film integrity Warranty for walls and roof and a30-year warranty against fade and chalk. 10 year edge rust warranty against acid rain.

 21 colors to best suit your surroundings! Mix and match the roof, sides and corners.

There are legs on the bottom with the siding surrounding the bottom to ground level.

Concrete pad is recommended but not necessary.

Use railroad ties, solid concrete blocks/pavers. 

The chimney is made out of Schedule 40, 1/4″ thick, solid steel pipe and is surrounded by air as well. It tops out at about 90″ feet above ground. You can EASILY add standard 6″ stove pipe extension(s) using our adapter.Chimney/Flue Adapter

Solenoid activated damper 

Super easy access!! 

Some other manufacturers have to
have the whole hull removed by 2-3 people
to access these components!!

There is an extra 20px rear access hinged door. All electrical items are in back, safely behind the door/lid! 

HyProTherm has easy pipe (air duct) hookup and electrical hookups (simple 110V wiring). 

No special tools needed.

The easiest furnace for the self-installer to put in!

We help you every step of the way!

Carrying log of firewood

Many people can say that
they can pay for their
HyProTherm forced-air wood furnace in
2 years or less of propane bills!

Start with a small chunk of wood.  :o)

You can use these bigger, cheaper pieces or smaller ones – whatever you can easily handle. The bigger ones (rounds) require less cutting and no splitting so they cost less – about 80-90 a cord in most areas.

ANY wood is cheaper than oil, gas and electricity! One person said that they have never used their propane heater after propane prices tripled!

 A fire in minutes!

Whole rounds burn longer and cleaner and
it’s so nice not to have to split the wood!!

Shove the logs in on top of each other.

Use the 6 foot poker (provided) for safety to push them in.

That big poker comes with the furnace – for FREE!

Thought there wasn’t a fire?

Think again!

Within a couple of minutes – literally –
this fire was roaring!

We use state-of-the-art Solar Guard insulation all around!

Solar Guard is only 1/4″ thick but combines a thermal break, reflective insulation and an insulating layer of R11.6! It has backing on both sides and is aluminum foil backed on one side. We then insulate on top of that with R11 vinyl-backed fiberglass in the walls and ceiling!

TRIPLE INSULATED (R50) ON TOP – like a passive Solar house. You cannot feel the heat when you touch the siding!

That gives you R22.6 in the walls and now R50 in the ceiling!

FREE in Northern U.S. states and in Canada and Alaska.

http://www.silvercote.com/solarguard_reflective_insulation.php

http://www.silvercote.com/PDF/solarguardspec.pdf

CALL 828-683-0025 
9 AM – 9 PM ET – 6 days a week!

We will build YOUR furnace in any combination of 21 different, exciting colors!

Seven Different Furnace colors 

LOTS of Different colors and ALL come with motion lights (black or white)!
Water furnaces are shown here to display the assortment of colors.

Ocean Blue with White; White and Red; Ivory with Brown; Green with Black; White with Black; Ivory with Green

Just a few EXAMPLES of Color Combinations:

Taupe Sides/Black Front

Brick Red/Black




 


CLICK ON some PICTURES for a 20pxR IMAGE

Outdoor Wood Burning Furnace Colors

Not all colors are available at all times.

We can also build your furnace without siding,
so that you can  for those who want to put it in an outbuilding
or you can apply regular siding, brick, faux (cultured) stone
or almost anything else you can imagine.

This gives you a savings of $300.00!


Questions about stainless steel answered


Do you build with stainless steel?

Hi! 

No, we don’t build stainless for several really good reasons.

Our furnaces last longer than most stainless furnaces, with MANY of our water furnaces still in use after 30 years plus!!

1. Mild steel transfers heat better than stainless does.

2. Stainless is a great sales feature, but little else, since most companies use cheap stainless, like a car’s exhaust system (which will rot and fall off).

There are many cheap grades of stainless out there.

3. Since stainless is so expensive, the fireboxes are made really thin. Some are no thicker than the metal of a trailer fender!! That’s why you see so many split and broken apart.

Our firebox is almost 4/10th of an inch thick, as opposed to .200 in many furnaces. They never rust through.

We replaced several stainless steel Hardys and there are many leaking Central Boilers and Hardys on eBay for sale.

4. Stainless is more prone to stress cracks, so why use it?

5. Unless the stainless is retreated after welding, you’ve lost all of it’s properties through the heating of the metal. And it’s being welded to mild steel anyway, so what’s the use?

Like I said, it’s a great sales feature but our super thick mild steel furnace heats better, doesn’t crack and split – and last longer!

If stainless was better, we’d surely be using it after 46 years of experience.

Best regards,

Ben

All ThermoWind models will burn COAL as well because we have a forced air induction fan that blows air up through the grates just like a blacksmith’s forge; the only way that coal will burn is feeding oxygen from the bottom.  

That is why so many other furnaces and boilers will not burn coal because they have a fan on the front door, which will not work.

ThermoWind 1000
is Rated to Heat up to 4375 sq. ft.¹

$4897 – NEW DESIGN

Up to 4375 sq. ft, 
with pull-out ash tray, pre-wired,
a 25% bigger firebox (28″ deep x 30″ wide x 34″ high);
more wood capacity
which means less loading! 



Sunset in AR – Click on Photo for LARGER IMAGE!
Your choice of 20 different colors at NO CHARGE!
(see very bottom of this page)

New design with bigger doors
(2 foot by 2 foot opening),
pre-wired,
with a pull-out ash tray!
1020 CFM Blower

$4897 – NEW DESIGN

Optional CAST IRON grates $65 each

ONLY $4667 – Legacy (original) DESIGN
is Rated to Heat up to 3500 sq. ft.¹ 

This firebox has the same 36″ cylinder 
(Original Legacy model only) and is 28″ deep.

It is rated at 91,000 BTU BTU Legacy / 114,000 New Design
burning a good hardwood like oak
burning a good hardwood like oak and better hardwoods
like Hickory, Locust or Hedge can potentially give you
25% MORE BTUs

Recommended pad is is 50″ wide x 94″ long minimum,
plus any extra you want it the back, where the fans are.


ThermoWind 2000

is Rated to Heat up to 6575 sq. ft. ¹

Has a BIGGER 3-speed 2020 CFM blower
and a bigger firebox (42″ vs. 28″ deep)
42″ deep x 30″ wide x 34″ high
it’s 50% bigger than the TW1000
(Only $700 more for a 50% bigger furnace!)

Recommended pad is is 50″ wide x 112″ long minimum,
plus any extra you want it the back, where the fans are.

$5597 – NEW DESIGN
– NEW DESIGN 6575 sq. ft,
with pull-out ash tray, a 25% bigger firebox; more wood capacity
which means less loading! 


Just $700 more than the smaller furnace but 50% BIGGER!

Legacy (original) Design 
$5357


Optional CAST IRON grates $6
5; 2 needed = $130.00 

Original Legacy Design with a Round firebox is Rated to Heat up to 5500 sq. ft. ¹

135,000 BTU Legacy / 169,000 New Design
burning a good hardwood like oak


ThermoWind 3000

ThermoWind 3000 Forced-air wood furnace

is Rated to Heat up to 8600 sq. ft.¹

With 2020 CFM 3-speed fan
55″ deep x 30″ wide x 34″ high

It is rated at 165,000 BTU BTU Legacy / 206,000 New Design
burning a good hardwood like oak.

$6057  up to 8600 sq. ft, NEW DESIGN which has a BIGGER 3-speed 2020 CFM blower, pull-out ash tray, a bigger firebox; more wood capacity which means less loading! 
Optional CAST IRON grates $65; 2 needed = $130.00  

Original Legacy Design with the Round Firebox,
is Rated to Heat up to 6875 sq. ft.¹

only $5797 – Legacy (original) Design

Recommended pad is is 50″ wide x 88″ long minimum,
plus any extra you want it the back, where the fans are.

 


ThermoWind 4000

 

Normally sold with round 12″ ducts (top) but also sold with square ducts

as shown in this photo below because we custom build everything!


is Rated to Heat up to 10,700 sq. ft.¹

Loading twice a day but it will heat more but it has to be loaded more often

The ThermoWind 4000 is designed to heat a large buildings of up to 10,700 sq. ft.

It will have two full-size furnace fans on it (2020 CFM each), to better heat a large building – with a total of 4 ducts ( 2 supply and 2 return). It has a 69″ firebox that is 3 feet wide and has two firebox doors; one on each end, to better and easier load the furnace.  It has a forced air draft fans with automatic dampers on it.

It is rated at 205,000 BTU BTU Legacy Cylinder Firebox;  Capacity; 31.92 cubic feet

It is rated at 256,000 New Design, burning a good hardwood like oak. (28.4% Bigger)

Firebox Capacity: 41 cubic feet and is 1/4″ thick (as thick as most boilers on the market)

Firebox Dimensions: 69”L x 30”W x 34”H

Outside Dimensions: 72.5” x 76” X 87.5″ HIGH (Top of Flue)    

Recommended pad is is 75″ long (6.25 ft) x 12 ft. 4″


$7617 
Up to 10,700 sq. ft,
NEW DESIGN
with pull-out ash tray, 
pre-wired,
25% bigger firebox,
= more wood capacity
which means less loading! 

__________

The price is $7367 for the Legacy (Original) Design with the Round Firebox

Optional CAST IRON grates, either model is $195 for three (requires 3 grates)

The Legacy ThermoWind 4000 is designed to heat a large buildings of up to 8,500 sq. ft.   

¹ Heating a well-insulated home in a climate as cold as PA,
using a good hardwood like Oak and loading it twice a day.

FYI: If you are heating HALF as many square feet as our rating,
you can load it just ONCE a DAY!

REMEMBER! There is no such thing as a furnace that is too big because it is NOT like an air conditioner,
where if you get one too big, it becomes inefficient.

 

This is like getting a bigger propane or oil tank!  You can load it with more wood (full rounds – no splitting!) and it will burn longer and therefore you will load it less often. No one has ever complained and said that I sold them one too big. In contrast, many people have said, “I wished that I listened to you!”

 

 

Wadena / Hopsco Forced Air Furnace vs
Hyprotherm Forced Air Furnace

Hopsco who purchasedWadenaHyprotherm Manufacturing LLC
Firebox Thickness: only 3/16″
24/28″ deep
Firebox Thickness:
33.3% thicker at 1/4″
28-68″ deep!
ODF1500: 780 lb ODF2000: 950 lbTW1000: 1669 lb
TW2000: 2020 lb
TW3000: 2406 lb
TW4000: 3200 lb
Blower:
Just 1500 CFM
34% bigger blower: 2020 CFM

Heating area

ODF1500: 2,800 sq. ft.
ODF2000: 4,000 sq. ft.

TW1000: 4,375 sq. ft.
TW2000: 6,575 sq. ft.
TW3000: 8,600 sq. ft.
TW4000: 10,700 sq. ft.
This is loading it twice a day OR ONCE A DAY heating half of that square footage.

Note: There is no such thing as a furnace that is too bigbecause it is not like an air conditioner, where if you get one too big, it becomes inefficient.

This is like getting a bigger propane or oil tank!  You can load it with more wood (full rounds – no splitting!) and it will burn longer and therefore you will load it less often. No one has ever complained and said that I sold them one too big. In contrast, many people have said, “I wished that I listened to you!”

Duct Size 10″
20% bigger Duct Size; 12″
Flue must be purchased separately87.5″ Flue included WITH a chimney cap²
Firebrick must be purchased!No Firebrick needed due to thicker firebox!
 I have never heard of this furnace until I saw this post so I checked out the website. The first thing I noticed was the tiny air ducts, then I saw only 500 cfm fan?!Those two items would make me walk away and not look back.
See review
COMPARE to our 20% bigger ducts AND our 34% bigger fan!

² OUR Flue drops down into the firebox 14 inches, trapping in the heat and the smoke but more importantly, the gases, due to this huge secondary burn chamber, which will be burnt off; valuable heat energy that would have been otherwise lost, up the flue. 

 

Underground insulated ductwork shown.

CALL 828-683-0025
9 AM – 9 PM ET – 6 days a week!

FURNACE DIMENSIONS of Legacy Models 

HyProTherm Thermowind 1000
45″ x 48.5″ x 90″ tall –
1480 lbs not crated
Crated weight Approx: 2069 lb

HyProTherm Thermowind 2000
45″ x 54.5″ x 90″ tall
1840 lbs not crated
Crated Weight Approx: 420 lb

HyProTherm Thermowind 3000
45″ x 54.5″ x 90″ tall
1840 lbs not crated
Crated Weight Approx: 2806 lb

HyProTherm Thermowind 4000
45″ x 54.5″ x 90″ tall
1840 lbs not crated
Crated Weight Approx: 3600 lb

FIREBOX SIZES (Original – Legacy Design)

Model       Description    Width   Depth    Height (Legacy; approx)

TW-1000   36” cylinder    36”      28”         26” + 10” for Ash Pan*

TW-2000   36” cylinder    36”      42”         26” + 10” for Ash Pan

TW-3000   36” cylinder    36”      55”         26” + 10” for Ash Pan

TW-4000   36” cylinder    36”      68” ¹       26” + 10” for Ash Pan
¹With two doors; a door at each end of the firebox

NEW Design Firebox formed with ONE PIECE of steel, using a 430 Ton Press Brake

Model      Description      Width     Depth   Height

TW-1000 square firebox   30”      28”         34”

TW-2000 square firebox   30”      42”         34”

TW-3000 square firebox   30”      55”         34”

TW-4000 square firebox   30”      69”        34”
¹With two doors; a door at each end of the firebox

________________________

Fireboxes are just 22″ from ground level for easy loading!

All ThermoWind models will burn COAL as well because we have a forced air induction fan that blows air up through the grates just like a blacksmith’s forge; the only way that coal will burn is feeding oxygen from the bottom.  That is why so many furnaces will not burn coal because they have a fan on the front door, which will not work.

*Non-removable Ash “Pan” or receptacle on Legacy Model

All NEW models have a pull-out ASH PAN!

All specifications subject to change at any time.

TW1000, TW2000 and TW3000 models

 

 


HyProTherm has been building furnaces since 1972!

Our furnaces have stood the test of time.

HyProTherm Forced-Air Outdoor Wood Furnaces are WELL BUILT to save you money
by producing heat efficiently with a minimum of waste, expense, or unnecessary effort.
Although our forced air furnaces are a new line, they are built using the same materials,
familiar design and proven techniques that we have been using for 46 years.

Perfect for folks with cabins or homes that are unattended.

Perfect for homes without an existing heating system!

Will heat your home just as well as a gas or oil furnace. (Will not heat your domestic hot water.)

No worries about water freezing ever again! No water tests!  No pumps!


THE HyProTherm OUTDOOR WOOD BURNING FURNACE

How does an outdoor furnace heat my home?

The HyProTherm Outdoor Wood Furnace is designed to save the absolute most energy and provide the most comfortable heating available; not dry. It heats your home by heating a firebox surrounded by a steel air chamber. When this air chamber reaches a preset temperature a fan controller turns on the main circulation blower (our built-in furnace fan). This blower forces the air into your existing central duct system. Can also be used without any existing ductwork.

How do the Thermostat Controls work?

The only visible addition to the heating system inside your home is a 2nd thermostat, which is located near the existing thermostat, where possible. This thermostat actuates the combustion blower of your outdoor furnace to fuel oxygen into the smoldering fire.. When the air inside the air chamber reaches the optimum temperature, a fan controller turns on the main circulation blower. This blower forces the air into your existing central duct system (if you have any). The original wall thermostat turns on your original furnace, if the outside wood furnace is not in operation. Your existing furnace will take over automatically, to maintain your household temperature.

This is good if you can’t get home to fill the furnace with wood or if you go on vacation. No switched and no relays to make this happen.

Original Legacy Design with the smaller door

Two buried 12″ pipes carry the heat to the house
and the cooler return air comes back.

This is standard steel duct wrapped with insulation.
The insulated underground pipe looks different than this.
See DUCTWORK below and black pipe kit above.

We are the FIRST in the industry to have
special insulated underground ducts!

CALL 828-683-8055
9 AM – 9 PM ET – 6 days a week!

 


We custom build every  furnace for you,
so when you order, you can
have YOUR choice of
21 great colors
with over 8000 different Color combinations!

PLUS square ducts
instead of round (additional cost)


ALL FURNACES purchased come with new Superwool and Knauf insulation!

The COLD WEATHER PACKAGE is available, as well!

Now with even MORE INSULATION!

R50 in the roof!

R21.6 in the walls!

More than a house!!

We now use SOLARGUARD TOO!

It’s a state-of-the-art insulation that
fights heat loss three ways;
radiation, conduction and convection heat losses.

Check Solarguard out at: http://www.silvercote.com/solarguard_reflective_insulation.php

 

Fed up with High Oil Propane, Electric prices? 

Smoke in your house? Bugs, trash, bark from carrying wood in?

Heat your whole house with a clean, efficient
Forced-Air OUTDOOR WOOD FURNACE!
GO GREEN!

No more $3.00 – $4.00 Oil or high dollar Propane.
No more lugging wood into the house!
No smoke in your house ever again! No bugs either! NO mess!

This furnace doesn’t burn up the oxygen in your house or suck cold air in from outside!
NO DRIED OUT AIR

Save your lungs and help prevent allergies too.

WOOD is still cheap! …AND PLENTIFUL!
and use large un-split logs – in the HyProTherm OUTSIDE FORCED-AIR WOOD FURNACE –
the least expensive wood of all!

Have Clean Heat, Clean Air, Clean Floors and walls too!


NOW with a 

20 YEAR PARTS and LABOR WARRANTY!*

Includes an On-Site Warranty
that others don’t offer
!!
5-Years is paid for 100%;
Years 6-20 are generously pro-rated.

What other manufacturer offers that
and who else has been around 46 years?

NOBODY!

A lot of warranties only cover parts (not labor)!
OR
You have to ship the furnace back to the factory – at your expense.
Kind of negates the warranty, doesn’t it? 

Ours covers Parts AND Labor for TWENTY YEARS!*
and it’s coverage On-Site –  NO SHIPPING!
(Electrical components have their own respective parts warranty)


Why buy a HyProTherm Outdoor Furnace?HyProThermThe others
Our fan is in the back, behind a door, where you can’t get shocked AND it blows the air through the grate into the bottom of the fire LIKE A BLACKSMITH’S FORGE – NOT into the side of the fire! Fires burn from the bottom up, right?NO
We make it simple without a lot of expensive electronics to breakNO
We make it user serviceable. Anyone can maintain our furnace!NO
We make our firebox to last! Ours is thicker!  3/8″ inch vs. 1/8 to 1/4.NO
We give accurate BTU ratings using an established scientific formula. They say what sounds good.NO
We have a 2-light motion detector light on the frontSome
We have a forced-air fan not a dismal damper to fuel the fire with oxygen. More complete burning!NO
No filling with water every week –  or EVER!NO
We have been building fine energy efficient  furnaces for 39 years!NO
Our grate uses 3/4″ thick Bar Stock! OPTIONAL CAST IRON!NO

Green Forced Air Furnace

Our most popular color – Green with Black trim

Perfect for folks whose homes have power failures often
or those people with cabins, shops or homes that are left unattended.
NO risk of water freezing! No fire risk either!


Why buy an outdoor wood furnace?

  • No logs to carry in = no messy ashes and bugs in the house!
  • You can have your outdoor furnace conveniently located it near the
    wood pile, so you don’t have to carry wood all around.
  • Safety
    • The chance of carbon monoxide build-up in your home is eliminated.
    • Eliminate allergies by getting the smoke outside!
    • The chance of a gas explosion from your furnace in your home is eliminated.
    • Indoor pollutants of harmful gases and fumes are eliminated too.
    • The chance of chimney and flue fires is eliminated, in your home.
  • If you live in a suburban or rural area near a source of cheap wood, you could heat your
    home for the entire season for the cost of one month’s electric heat bill, propane or oil bill. 
  • An outdoor furnace requires less tending than a smaller indoor wood stove or insert.
  • No inside oxygen is used to fuel the heat like other wood or gas burning units.
  • Does not cause respiratory problems like burning wood indoors. No dry air either.
  • Wood is cheaper than buying it for a fireplace. Instead of 12-18′ wood split,
    you can put 26 or 40″ pieces in this one and use full rounds.
    No splitting wood; that makes buying wood even cheaper.
  • Burning wood, a total renewable resource, is much less expensive than other fuels.
  • The cost of electric, gas, oil, or propane can be very erratic.
    The low cost of wood remains constant – or in many cases, FREE!.
  • The furnace hooks up to any existing gas pack, heat pump or forced air system
    – or can be used without any exiting heating system or ductwork.

Most people say that they pay for their furnace in 2 years or less!
Imagine getting a 50% return on your money!

Where else can you get that?
 An outdoor furnace is the BEST INVESTMENT EVER!

You’ve found the BEST!

You can click Click on some Pictures below for a LARGER Image
Please wait while these pictures load. can take up to 3 min on a modem to load the whole page.

Ivory and Blue Outside Wood Burning Furnace

LEGACY (original design) shown above
Lights come shipped inside the firebox,
so they don’t break in shipping.

A water furnace is shown here for color only.

Get the Bugs, Trash, Wood
and Smoke outside.
Your lungs will love you
and your new HyProTherm!

Many people report getting
lower insurance rates because
they are getting the fire and that
related hazard, out of the house!

Extra large, 2 foot by 2 foot waist high loading door opening.

No more bending over, straining your back to load wood! Safety latch!

A PROVEN and trusted design – since 1972!

We feel we build the safest furnace
(nothing electrical, unprotected on the outside of the furnace). 

We have the BEST PRICES and a Very Friendly Staff to help you every step of the way.

Outdoor Wood Burning Furnace Motion Lights

These furnaces now come with a double flood light on the front (black or white), for ease and safety when loading your wood at night.

It’s a MOTION LIGHT!

No switches. No forgetting to turn it off. If it’s dark outside and you go near the furnace, the lights turns on!

New, nicer looking furnace!

Now with nice neat looking butyl tape and grommets.

Outdoor Wood Burning Boiler Door

Think the door isn’t big enough? 
It is NOW at 2 feet by 2 feet!
A 15″ round oak log, just 30″ long, will weigh a whopping 112 lb
– more than most people can ever lift! 

Trust me, the door is more than big enough for anything
you can lift into the furnace
AND the thick door frame
will take a pounding as you throw them in!

NOW BIGGER 24″ x 24″ Door   – The TOUGHEST door you’ll ever find with TWO 1/4″ solid steel plates separated by a 3″ air shield AND our better insulation. This plate keeps the hot air in and deflects it off the door. With very little metal to transfer heat to the door it does an excellent job of insulating the door.

Very heavy duty hinges! Motor mount style. OURS won’t fall off!

Outdoor Wood Burning Furnace Firebox

Click on Pictures for a Larger image
1/4″ thick flue pipe – will not get damaged by throwing wood in it.

The chimney is low on the firebox and exits about 1 foot from the bottom, so that the smoke – or more importantly, the gas and heat – is trapped so that it doesn’t quickly escape out the flue. That would be a big loss of efficiency.  

This way the air has to cool off to find its way down and out the chimney. This is also a better idea since you don’t have hard-to-clean baffles getting a creosote buildup on them.

Having the chimney come down low
and stops the heat, gases and smoke from rushing right out the chimney AND creates a HUGE Secondary burn chamber to burn off all the gases from the wood – a HUGE source of energy!

When wood starts to burn it’s the gas that burns first!

Another advantage is that the chimney exits through the air chamber, further heating it up – for free! Nothing does better!

This also means that you will burn less wood than with other manufacturer’s furnaces, therefore you will use more wood – being less than 75% efficient. That’s proof, not just rhetoric.

 

1/4” Thick Steel Firebox – WILL NOT burn through – EVER! Will not crack or split like stainless steel!

We have never had a firebox failure, crack, split, rust-through or leak in 46 years of making the 3/8″ thick firebox. After all, it is 50% thicker (or more) than most of the competition!

Compare Firebox thickness to another popular furnace at only .125″ and another at .1875″ thick. 

We have a removable ash TRAY! Some other makes don’t even have an ash receptacle at all! 

That makes it VERY HARD to clean out! You have to let the fire die down  or move the burning wood aside to scoop out hot ashes. OUCH!

It is made of a solid sheet of 3/8 inch thick steel, formed into 3/4 of the firebox by a 430 Ton brake press! 

It WILL NOT RUST through in a lifetime! Will not get stress cracks like Stainless Steel!

We have furnaces well over 30 years old and more, still in use today!

3/4

The removable grate is made out of CAST IRON unless you specify a wood model which gives you a super thick 3/4″ inch bar stock grate 

Most grates from other manufacturers (if they have them) are only 3/8″ – 1/2″)

 

Outdoor Wood Burning Furnace Ash Receptacle

Click on Picture
for a larger image

The blower in the back is a great aid
in getting a fire started. It also recovers
the air temperature much quicker,
and burns the wood up more completely
because oxygen is being fed to
the bottom of the flame –
like blacksmith feeds his fire!

A clean-burning fire is more efficient than a smoky air-restricted fire. The forced draft will burn hotter and therefore cleaner. Secondary gases burn at 1200 degrees and with our furnace, they are trapped in the firebox so that they are available to be burnt off without escaping out the chimney. The HyProTherm will exceed that temperature.

 <  View through ash pan door and you can see the fan blower inlet (seen in back of this picture).

The fan blower determines how hot the fire burns and therefore how hot the air in the furnace gets. A thermostat on the back of the furnace tells the blower when to turn off and on (and has a solenoid activated door/damper), so it doesn’t run all the time and will not waste wood.

This is a LOT more efficient than a manual damper will ever be!

The air blows into the bottom of the fire, through the grate – just like a blacksmith’s forge. That’s better than blowing in from the front door (very obvious when you see that big box on the door) and into the side of the fire, as all the others do (if they even have a fan).

You get more complete burning fire when the oxygen is fed through the bottom!

Outdoor Wood Fired Forced Air Furnace

Actual photo of a fire inside our firebox,
only minutes after reloading with wood!


Firebox size on the Thermowind 1000 LEGACY version, with the round firebox, is 36″ wide x 28″ deep x 27″ high (due to ash pan in bottom). All sizes O.D.

The NEW style Has the same lengths; 28″ – 69″ but taller at 34″ tall and 30″ wide and holds 25% more wood = 25% LONGER BURN TIMES BEFORE REFILLING!

The air chamber totally surrounds the firebox, top and both sides.

The chimney is also surrounded by air, drawing off heat.

The ash receptacle (and hot coals) are surrounded with air too, in the bottom!

2020 CFM 3-speed Forced air fan for home or building (bottom)
and forced air fan for furnace with solenoid activated damper fan. 

Forced-Air Damper and fan

The fans and thermostat
included, have a one-year warranty.

2000 CFM on all ThermoWind furnaces.

You get a solenoid activated damper too, INCLUDED!

Most parts are available everywhere.

There are NO proprietary circuit boards!

In case of a power failure, you can still have a nice warn house, when everyone else is cold!!


Requires a standard portable 4000 watt generator for the 1000, 2000 and 3000 models,
(this is because of the startup power that the motors take),
but you will have plenty of power left over for lights, small appliances, etc.

 

You MAY need an heating and air guy to hook up the duct work, but all you really need is an adapter from a round 12″ pipe to your rectangle (usually) pipe..

 

Flanges to connect outside duct to indoor furnace

Everything is very simple and easy to do. There is a comprehensive manual, with lots of pictures and diagrams, that will help you every step of the way. You can also call me or the factory for assistance.

 

Outside Forced Air Wood Fired Furnace

NOW there is no need to put the furnace right next to the house, with our exclusive insulated underground duct!!

Eliminate the threat of fire by having the furnace well away from the house just like with our outdoor wood fired WATER furnace.

We are the only manufacturer that is doing this!

Perfect for folks who often have power failures or those people with cabins, shops or homes that are unattended.

The two connectors in the back hook up to the blue pipes which are buried in the ground. 

These pipes are only 12″ in diameter so a standard backhoe with a 24″ bucket can easily dig a trench for the pipes to lay side-by-side.

  • Air & Water Tight

  • Foamed Walls

  • Easy to Install

  • Quiet and Efficient

  • PVC FREE

  • GREEN BUILDING Approved Adhesives


Ideal for new construction, as you can see here
but you will just need two pipes running to the house
in an existing structure to connect to your ductwork;
one supply and one return.

Outdoor Forced Air Wood Burning Stove

Round Firebox/Legacy model style shown but the
new models have the SAME blower configuration.


The ash pan is removable ash pan and it is easily cleaned at the front, through the the lower/smaller door.

WARNING! Some other makers don’t even have an ash pan!You have to let the fire die out or shove the hot burning logs aside (yeah, right!), then clean it out while the firebox is 700F plus – and then restart the fire in the dead of winter! Do you want to do that?

There is an fan/blower that feeds air into the firebox, below the grate, to feed oxygen to the fire. It is thermostatically controlled and solenoid activated for greater efficiency, to keep the air temperature in the furnace between certain parameters. 

This is far better than an inefficient manual draft opening.

 

Fored-Air Outside Wood Burning Furnace

Hanging Outdoor Wood Burning Furnace

Our furnace is so strong and well-made,
that the chimney alone is strong enough
to carry even the 2000 lb. weight of
our biggest forced-air furnace!

We move them like this every day!

The exterior is made of Heavy Duty Siding – 29 gauge structural quality, full-hard steel. 10 layers of protective coating. It has a Lifetime film integrity Warranty for walls and roof and a30-year warranty against fade and chalk. 10 year edge rust warranty against acid rain.

 21 colors to best suit your surroundings! Mix and match the roof, sides and corners.

There are legs on the bottom with the siding surrounding the bottom to ground level.

Concrete pad is recommended but not necessary.

Use railroad ties, solid concrete blocks/pavers. 

The chimney is made out of Schedule 40, 1/4″ thick, solid steel pipe and is surrounded by air as well. It tops out at about 90″ feet above ground. You can EASILY add standard 6″ stove pipe extension(s) using our adapter.Chimney/Flue Adapter

Solenoid activated damper 

Super easy access!! 

Some other manufacturers have to
have the whole hull removed by 2-3 people
to access these components!!

There is an extra large rear access hinged door. All electrical items are in back, safely behind the door/lid! 

HyProTherm has easy pipe (air duct) hookup and electrical hookups (simple 110V wiring). 

No special tools needed.

The easiest furnace for the self-installer to put in!

We help you every step of the way!

Carrying log of firewood

Many people can say that
they can pay for their
HyProTherm forced-air wood furnace in
2 years or less of propane bills!

Start with a small chunk of wood.  :o)

You can use these bigger, cheaper pieces or smaller ones – whatever you can easily handle. The bigger ones (rounds) require less cutting and no splitting so they cost less – about 80-90 a cord in most areas.

ANY wood is cheaper than oil, gas and electricity! One person said that they have never used their propane heater after propane prices tripled!

 A fire in minutes!

Whole rounds burn longer and cleaner and
it’s so nice not to have to split the wood!!

Shove the logs in on top of each other.

Use the 6 foot poker (provided) for safety to push them in.

That big poker comes with the furnace – for FREE!

Thought there wasn’t a fire?

Think again!

Within a couple of minutes – literally –
this fire was roaring!

We use state-of-the-art Solar Guard insulation all around!

Solar Guard is only 1/4″ thick but combines a thermal break, reflective insulation and an insulating layer of R11.6! It has backing on both sides and is aluminum foil backed on one side. We then insulate on top of that with R11 vinyl-backed fiberglass in the walls and ceiling!

TRIPLE INSULATED (R50) ON TOP – like a passive Solar house. You cannot feel the heat when you touch the siding!

That gives you R22.6 in the walls and now R50 in the ceiling!

FREE in Northern U.S. states and in Canada and Alaska.

http://www.silvercote.com/solarguard_reflective_insulation.php

http://www.silvercote.com/PDF/solarguardspec.pdf

CALL 828-683-0025 
9 AM – 9 PM ET – 6 days a week!

We will build YOUR furnace in any combination of 21 different, exciting colors!

Seven Different Furnace colors 

LOTS of Different colors and ALL come with motion lights (black or white)!
Water furnaces are shown here to display the assortment of colors.

Ocean Blue with White; White and Red; Ivory with Brown; Green with Black; White with Black; Ivory with Green

Just a few EXAMPLES of Color Combinations:

Taupe Sides/Black Front

Brick Red/Black




 


CLICK ON some PICTURES for a LARGER IMAGE

Outdoor Wood Burning Furnace Colors

Not all colors are available at all times.

We can also build your furnace without siding,
so that you can  for those who want to put it in an outbuilding
or you can apply regular siding, brick, faux (cultured) stone
or almost anything else you can imagine.

This gives you a savings of $300.00!


Questions about stainless steel answered


Do you build with stainless steel?

Hi! 

No, we don’t build stainless for several really good reasons.

Our furnaces last longer than most stainless furnaces, with MANY of our water furnaces still in use after 30 years plus!!

1. Mild steel transfers heat better than stainless does.

2. Stainless is a great sales feature, but little else, since most companies use cheap stainless, like a car’s exhaust system (which will rot and fall off).

There are many cheap grades of stainless out there.

3. Since stainless is so expensive, the fireboxes are made really thin. Some are no thicker than the metal of a trailer fender!! That’s why you see so many split and broken apart.

Our firebox is almost 4/10th of an inch thick, as opposed to .200 in many furnaces. They never rust through.

We replaced several stainless steel Hardys and there are many leaking Central Boilers and Hardys on eBay for sale.

4. Stainless is more prone to stress cracks, so why use it?

5. Unless the stainless is retreated after welding, you’ve lost all of it’s properties through the heating of the metal. And it’s being welded to mild steel anyway, so what’s the use?

Like I said, it’s a great sales feature but our super thick mild steel furnace heats better, doesn’t crack and split – and last longer!

If stainless was better, we’d surely be using it after 46 years of experience.

Best regards,

Ben

 

HyProTherm
FORCED AIR WOOD Furnace
OUTDOOR WOOD FURNACE

The Federal EPA laws restrict Outdoor Wood BOILERS – and this is not a BOILER! 

Please check with YOUR state before buying
NOT permitted in NY state for heating a residence
because some states have their own state EPA laws but again;
most all talk about BOILERS and this is NOT a boiler!

See the comparison between the
Wadena / Hopsco Forced Air Furnace vs
Hyprotherm Forced Air Furnace BELOW
 

 

FORCED AIR WOOD Furnace

ThermoWind 1000
is Rated to Heat up to 4375 sq. ft. (well-insulated, in a PA type weather)
in the new design, with the 25% bigger firebox 

CALL 828-683-0025
9 AM – 9 PM ET – 6 days a week!

(waterless – no water to freeze)

Another HyProTherm FIRST!

Shown using insulation sleeves over galvanized 12″ duct.

Ductwork and a blower, instead of a pump on a boiler, to simply blow the hot air into your home,
into existing ductwork BUT we can show you what to do it you don’t have ANY ductwork!

Video above, shows the proper insulation
that the furnace REALLY needs;
(we and everyone else have been doing it wrong
according to the insulation engineers!) 


We now have insulation with R-23 in the sides and R-57 in the front against the 700 degree firebox with up to R-88 optional EXTREME Cold Weather Package, which is just $307!

FREE DURING THE MONTH OF AUGUST!

ALL FURNACES purchased come with the new and SUPERIOR
Superwool and Knauf insulation!
ThermoWind 1000

Forced-Air Wood Furnace
is Rated to Heat up to 4375 sq. ft.¹

$4897 –  NEW DESIGN
with pull-out ash tray,
pre-wired with a bigger firebox;
more wood capacity means less loading!

 

Optional CAST IRON grates $65 each

Shown using insulation sleeves over galvanized 12″ duct and underground ductwork (Blue Duct™) below.


DYNAMIC DUCTWORK STORES ENERGY 
TECHNOLOGICALLY FOAMED SELF INSULATED AIR DUCT SYSTEMS

It is unique to other materials because it is manufactured with food grade plastic that is safe for humans and the environment.
The material is mixed with a foaming additive during manufacturing to achieve the density and performance parameter desired.
The preformed ductwork has the characteristic of a smooth low friction surface that is resistant to mildew, mold, and Radon;
under pressure it will not crack and is non-toxic and recyclable. In addition, the ductwork is self-insulating, adjustable and easy to install.

The thermal efficiency performance of TheBlueDuct™ has a test proven equivalency for delivery effectiveness
comparable to underground coated spiral ductwork wrapped in R10.

You can also use standard galvanized pipe with insulation shown in photo above.

That duct INSULATION is on eBay for $69.99 and here for $61.75 for 25 feet
 

Water-Less Wood Furnace
HyProTherm has done it again! Backed by our
46 years of experience, we have developed a
Forced-Air WOOD FURNACE that doesn’t need water!
Comes complete with a forced-air draft fan and automatic damper to fuel your fire with oxygen, plus a big, full-size furnace squirrel cage fan (3-speed 2020 CFM)
– IDEAL for any home or shop without an existing heating system! No furnace? No ductwork? No radiators? No boiler? No problem!!
– Excellent for those people with cabins or homes that are left unattended because the water won’t freeze; there IS NO WATER.
– Use our built-in furnace fan instead of an air handler or using your current furnace fan!
– Before spending thousands of dollars on a new furnace for your garage or shop, plus many more thousands for fuel – choose a ThermoWind  and heat for Virtually FREE!
– Eliminate the threat of a fire, by having the furnace away from the house, just like with our outdoor wood fired WATER furnace (often called a “boiler”.
– Do you want an indoor wood burning furnace for your attic or basement? Try our outdoor wood burning furnace instead; No carrying wood into the house, along with the bugs, bark and trash.
– NO SMOKE in the house either!
– Hook up our outside wood fired furnace to your central heating ductwork!
Only a forced air furnace inside your home can be used because ductwork is needed, so an electric, gas, oil. propane furnace, etc, and heat pump or geothermal system can be used.
No boilers or radiant floor heating systems can be hooked up. However, you can add ductwork to any building (or not even use any ductwork) to heat a building.
We can even help you if you don’t have any heating system now!

___________________

In case of a power failure,
you can still have a nice warn house,
when everyone else is cold!!

ONLY  in the case of power failure and if you want heat,
it requires a standard size portable 4000 watt generator for all ThermoWind models, (because of the startup power that the motors take), with plenty of power left over for lights, etc.

ONLY needed in case of a power failure; NOT needed for everyday use.
This furnace can go outside and does not have to be bolted to the house or go in the basement like many other models out there!
Heat is carried to your home through insulated 12″ pipes, buried underground or you can use regular and less expensive regular ductwork and insulate yourself.
According to the UL (Underwriters Laboratories) our furnace needs to be 5 feet away from flammables. The ThermoWind units cannot generally be more than 40 feet from your home because the temperature losses and airflow losses and shouuld be as close a possible to your  existing ductwork
You only need ductwork, a thermostat and thermostat wire plus a power wire to install. DO IT YOURSELF!
No more worries about frozen water OR RUST!
NO CHEMICALS and no annual water tests! No pumps!
Also perfect for folks who have power failures often (you would need a generator to get heat but there is no worry about frozen water, etc)
NOW there is no need to put the furnace right next to the house or in the basement with our revolutionary insulated underground pipe!
These air pipes are only 12″ in diameter so a standard backhoe with a 24″ bucket can easily dig a trench for the two pipes to lay side-by-side.
We are the ONLY wood furnace manufacturer that has this! 
It is an exclusive to us!

  • Air & Water Tight

  • Foamed Walls on underground pipe.

  • Easy to Install

  • Quiet and Efficient

  • PVC FREE ductwork

    DYNAMIC DUCTWORK STORES ENERGY

    TECHNOLOGICALLY FOAMED SELF INSULATED AIR DUCT SYSTEMS


Will burn Wood (even wet) OR COAL or both together!
All ThermoWind models will burn COAL as well because we have a forced air induction fan that blows air up through the grates just like a blacksmith’s forge; the only way that coal will burn is feeding oxygen from the bottom.  
That is why so many other furnaces and boilers will not burn coal because they have a fan on the front door, which will not work.